These two position 12V 20 Amp rocker switches replace the factory switch on any of our wiring harnesses, allowing you to control your LED light(s) with style. These switches have 5 pins and are SPST (Single Pole Single Throw) meaning they can be integrated into dash/rocker lighting to control the illumination of the icon; the lettering is illuminated at all times. These switches are 1.75" tall and 1" wide and come in multiple laser engravings.
Choose one of the universal wiring harness and switch options below to make wiring up your new lights a snap. Comes with everything you need. Just hook up the red wire lead to the battery and the black to a ground, then plug in the light and click the switch and you're lighting up the night!
These pigtails are for doing your own wiring and have raw wires on one side and a connector on the other side. The length of these varies but they are usually 3 to 6 inches long. If you are looking to extend your wiring harness and don't need the connector parts, we have wiring harness extensions or complete wiring harnesses available.
Add extra length to your LED light bar wiring harness with our wiring extensions, or use a splitter to turn 1 DT connection into 2! If buying by the foot, enter the footage needed and then hit add to cart.
These switches were made specifically for our Extreme Series X6/X6S Amber and White Light Bars. These control the clear spot and amber flood lights separately and are labeled accordingly on the switch. These switches are easy to replace, simply remove the old switch at the connector and plug in the new one! These come with either 20" wire or 40" wire to help you get the best fit for your build.
These RGB LED Whip Lights are a great option for your ATV/UTV, RZR, Jeep, quad, dune buggy & more! Each kit comes with everything you need and even includes a wireless RGB remote to control the color-changing LEDs. Hook these up to your turning signals, reverse lights, and brake lights to lead the way on those dusty trails. From solid color to flashing patterns, with 366 modes to choose from, the color possibilities are endless!
Relay holders are used to help organize your relays under the hood. One relay holder holds up to 3 relays one per prong. Choose between a universal mount with M8 rivet nuts (may require holes to be drilled) or bolt-on options for the 4Runner and Tacoma with bolts to fit the pre-drilled nuts in the engine compartment.